The Dragino LC03 is a LoRaWAN Wireless Remote Control which can be used to control the power of different electrical appliances.

The Dragino LC03 is equipped with overcurrent, overvoltage and shortcircuit temperaturerise protection, which can effectively prevent lightning strikes.

The shell of LC03 is made of fireproof PC material, with anti-ultraviolet material is added, which not easy to change color.

Each LC03 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN server and it will auto connect after power on. The LC03 has a patented zero-crossing trigger that can extend the life of the device. Users can switch sockets on the LoRaWAN server.

The Dragino LC01 is a LoRaWAN®-enabled relay controller designed for smart control of electrical appliances and lighting. Ideal for remote switching and status monitoring, the LC01 is built to deliver reliable performance in demanding environments.

The Dragino LC01 is equipped with overcurrent, overvoltage and shortcircuit temperature rise protection, which can effectively prevent lightning strikes.The shell of LC01 is made of fireproof PC mate rial, with anti-ultraviolet material is added, which is not easy to change color.

LC01 has zero-crossing trigger function,which can avoid sparks caused by voltage fluctuations and extend the life of the LC01 and controlled devices. Users can switch sockets on the LoRaWAN server.

Dragino BH01-LB/LS BLE to LoRaWAN Hub is an edge communication node device designed for loT applications. It uses the BLE Bluetooth module to periodically scan and collect data from surrounding Bluetooth temperature and humidity sensors (such as BCN02, iBeasons or third-party BLE sensors), and then uses the LoRaWAN protocol to transmit the data over long distances to the cloud platform, achieving seamless connection between Bluetooth devices and low-power wide area networks.

BH01-LB/LS is a BLE to LoRaWAN Hub which can turn BLE devices to LoRaWAN devices. This feature can help system intergrator has widely choice in sensor selection and simplify the network structure.

It is suitable for cold chain warehouse monitoring, smart agricultural environment monitoring, asset tracking and urban infrastructure health management. It combines the fexibility of Bluetooth and the wide coverage of LoRaWAN. Compared with wifi connection, it can siginifcantly reduce the deployment cost of the Internet of Things.

BH01-LB/LS has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.

BH01-LB/LS is powered by 8500mA Li/SOCl2 battery or solar panel with Li-ion battery for long term use.

The Dragino RS485-CB is a RS485 / UART to NB-IoT/LTE-M Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-CB converter, and configure RS485-CB to periodically read sensor data and upload via NB-IoT/LTE-M network to IoT server.

RS485-CB can interface to RS485 sensor, 3.3v/5v UART sensor or interrupt sensor. RS485-NB provides a 3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the total system power consumption.

RS485-CB supports different uplink methods including MQTT, MQTTs, UDP, TCP or CoAP for different application requirement, and support uplinks to various IoT Servers.

RS485-CB supports BLE configure and OTA update which make user easy to use.

RS485-CB is powered by 8500mAh Li-SOCI2 battery, it is designed for long-term use up to severa years.

RS485-CB has optional built-in SIM card and default IoT server connection version. Which makes it works with simple configuration.

PB05-L LoRaWAN Push Button is a LoRaWAN wireless device with Five push buttons. Once the user presses the button, the PB05-L will transmit the signal to IoT server via Long Range LoRaWAN wireless protocol.

PB05-L is shipped with a default PVC stick with satisifed icons.The sticker is not attached to the design for easy customized purpose.User can design customized PVC sticker and change the panel design.

PB05-L supports 2 x AA batteries and and can up to about 30k pushes(Key1~Key5). User can replace the batteries easily after they are fnished.

PB05-L has a built-in speaker, it can pronouns different sound when press button and get reply from server. The speaker can by disable if user want it.

PB05-L is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

LTS5 is a LoRa / LoRaWAN HMI Touch Screen designed for display purpose of IoT project. It have a 5.0" HMI touch screen, and support WiFi, Bluetooch, LoRa wireless protocol.

LTS5 is an Open Source software project. The MCU is ESP32 and Dragino LA66 LoRa module. There are lots of development source for ESP32 which can greatly reduce the development time.

The HMI touch screen of LTS5 supports drap & drop design. Developer can use SquareLine to easily customize the display UI for diferent application.

LTS5 use LA66 LoRa module, this module can be program to support private LoRa protocol or LoRaWAN protocol.

The Dragino T68DL Temperature sensor is a Long Range LoRaWAN Sensor with IP68 waterproof rating.

The T68DL allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

T68DL has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

T68DL is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

T68DL supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.

The Dragino SE0X-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture which can equipped with 4 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and uploads the value via wireless to LoRaWAN IoT Server.

The LoRa wireless technology used in SE0X-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

SE0X-LB supports BLE configure and wireless OTA update which make user easy to use.

SE0X-LB is powered by 8500mAh Li-SOCI2 battery , it is designed for long-term use up to several years.

Each SE0X-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

The Dragino LHT65N-VIB LoRaWAN Vibration Sensor is designed to detect and measure vibrations, shocks, or accelerations of an object. By analyze the motion of the object, LHT65N-VIB can send meaningful resulte such as: Alarm, device runtime, counting, vibration strenght to IoT platform for further analyze.

It targets professional wireless sensor network applications such as monitoring equipment status, water leakage alarm, usage statistics, vibration intensity detection, etc.

The LHT65N-VIB allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

LHT65N-VIB has a built-in 2400mAh non-chargeable battery which can be used for more than 3 years*.

LHT65N-VIB is fully compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

*The actual battery life depends on how often to send data, please see battery analyzer chapter.